Backflow Testing Barossa Valley
Keeping contaminated water out of the drinking supply
A backflow prevention device stops water from your property flowing back into the drinking water supply. Testable devices have to be tested when they’re installed and at least once every 12 months. Pukka Plumbing & Gas tests, installs and replaces backflow devices across the Barossa Valley.
Backflow Prevention Barossa Valley
What backflow is and why it matters
Backflow happens when water runs the wrong way through a pipe, usually because pressure in the supply drops or pressure on the property side rises. If a hose is sitting in a chemical drum, a trough or an irrigation line with fertiliser in it, that water can be drawn back into the supply. A backflow prevention device is a set of valves that stops this.
Properties that commonly need backflow protection:
- Wineries and other commercial sites
- Farms with chemical mixing points or stock troughs
- Irrigation systems, especially with fertiliser injection
- Properties with both mains water and rainwater
- Cafés, kitchens and other food businesses
- Fire services and large commercial water connections
- Reliable & On-Time
- Same-Day Service Available
- Local Barossa Expert
- Competitive Pricing
Annual Backflow Testing
In South Australia, testable backflow devices are tested at commissioning and then at least every 12 months. After a device passes, the tester sends a backflow prevention device report to the Office of the Technical Regulator (OTR) within seven days.
How Testing Works

Test the device
The device is isolated and each valve is checked with a test kit. The kit itself must be calibrated every year by a registered laboratory.
Repair or replace if it fails
If a device fails, it’s serviced or replaced and tested again. A report is only lodged once the device passes.
Report to the OTR
The passed test is reported to the Office of the Technical Regulator. Keep your own copy so you know when the next annual test is due.
Types of Testable Devices
The device you need depends on the hazard. The OTR’s report form covers reduced pressure zone devices (RPZD), double check valves (DCV), testable single check valves, pressure-type vacuum breakers, and air gaps and registered break tanks. Higher-risk sites, such as those using chemicals, generally need a higher level of protection. If you’re not sure what’s on your property or whether it’s due for testing, call Daniel and he’ll check.
Installing or Replacing a Backflow Device
New backflow devices are often needed when a business changes how it uses water, adds irrigation or chemical dosing, or when rainwater and mains supplies are combined. Devices that keep failing, or have reached the end of their life, are best replaced. For homes with both mains and tank water, see rainwater tanks and pumps. For winery sites, see winery plumbing.
Related Services & Areas
Areas we service for this work
Related services
See all plumbing services or the full list of areas we service.
Simple Backflow Testing Process
Book a test
Call Daniel with the device type, location and when it was last tested, if you know.
Test and repair
We test the device and repair or replace it if it fails.
Report
The passed test is reported to the OTR and you get a record for your files.
-
“Daniel came to our rescue after we were let down by another plumber. We were on a tight deadline and he told us exactly what we needed to do to prepare. The work was fast, efficient and punctual. I highly recommend his work.”
~Christine R -
“These guys are awesome. Professional job every time they’ve been here. From gas installations and plumbing work to fixing leaks and servicing our sewer and stormwater systems — they’ve handled it all for years. Highly recommend.”
~Vaughn H -
“Daniel was prompt and immediately friendly. We had an issue with water pressure in our home and he worked efficiently to get it sorted. Got the job done right. Would definitely recommend him.”
~Melanie O
Need Backflow Testing in the Barossa?
Call Daniel to book a test or ask about a new device.
Give Us a CallHow often does a backflow device need testing?
Testable devices are tested when installed and then at least every 12 months, and after any repair or replacement.
Who receives the test report?
In South Australia, the report for a passed test goes to the Office of the Technical Regulator within seven days.
What happens if my device fails?
It’s repaired or replaced, then tested again. We’ll explain the options and costs before doing the work.
Does my home need a backflow device?
Many homes have a low-hazard check valve in the water meter assembly. Extra protection is usually needed where there’s a higher risk, such as combined rainwater and mains systems, irrigation with chemicals or some home businesses. We can check your setup.
Do you test devices at wineries and farms?
Yes. Wineries, farms and other commercial sites across the Barossa Valley.
Need a reliable plumber in the Barossa or Adelaide’s Northern Suburbs?
Get in touch with Daniel today on 0431 511 530 for honest advice and quality plumbing services you can rely on.
Or fill out the form below and we will get back to you ASAP.