Rainwater Tanks & Pumps Barossa Valley
Tank water that reaches the tap at the right pressure
Plenty of Barossa homes, and almost every rural block, rely on rainwater. When the pump stops or the tank connections leak, the house can be without water. Pukka Plumbing & Gas connects tanks, installs and repairs pressure pumps and runs the water lines in between.
Rainwater Tank Plumbing Barossa Valley
Getting tank water to where it’s needed
A rainwater system is only as good as its plumbing. Undersized pipe, a poorly placed pump or a missing non-return valve will show up as weak showers, a pump that never stops, or no water at all. Daniel sets the system up so it works properly from the tank outlet to the tap.
Rainwater and pump work we do:
- Connecting new tanks to the house, garden and sheds
- Pressure pump installation and replacement
- Pump repairs and diagnosing pumps that cycle on and off
- Pressure tanks, non-return valves and isolation valves
- Tank overflows and inlet pipework
- Mains and rainwater changeover set-ups with backflow protection
- Water lines to sheds, troughs and gardens on acreage
- Reliable & On-Time
- Same-Day Service Available
- Local Barossa Expert
- Competitive Pricing
Pressure Pump Installation & Repairs
No pump, no water. On a tank-fed property the pressure pump runs every tap, toilet and shower. When it fails it’s urgent, so we work out quickly whether the pump itself has failed or something around it is the real cause.
What We Check on a Pump Call-Out

Pump keeps starting on its own
If the pump runs with every tap off, water is going somewhere. It’s usually a leak in the line, a dripping toilet cistern or a non-return valve that no longer holds. We find which before replacing anything.
Low or surging pressure
Blocked inlet strainers, air getting into the suction side, a worn pump or a pressure tank that has lost its charge can all cause weak or uneven pressure.
Replacing a failed pump
If the pump has reached the end of its life, we replace it with one sized for your house and outlets, and fit it so it’s easy to service and isolate next time. If a pump needs new hard-wired power, that part must be done by a licensed electrician.
Tank Connections & Overflows
New and replacement tanks
When a new tank goes in, or an old one is replaced, the outlet, inlet and overflow all need connecting properly. We plumb the tank to the pump and house, link multiple tanks where needed, and make sure the overflow goes somewhere sensible rather than undermining the tank pad or the house footings. Overflows that are causing trouble on a larger block are covered on rural drainage repairs.
Homes with mains and rainwater
Where a property has both SA Water mains and rainwater, the two systems must be kept separate or protected with the right backflow device, so tank water can never flow back into the mains. We set this up correctly, including changeover devices that switch to mains when the tank runs low.
Water Lines on Rural Properties
On acreage the tank is often a long way from the house, and there may be extra lines to sheds, stock troughs and gardens. We lay new poly lines, replace failed sections and fit valves so parts of the system can be isolated. If you think water is being lost somewhere along a long run, see leak detection and burst pipes and our guide to why a rainwater pump keeps losing pressure.
Part of a bigger rural job?
Tank water, septic and drainage are often connected problems on country properties. See rural plumbing for how we approach the whole system.
Related Services & Areas
Areas we service for this work
Related services
See all plumbing services or the full list of areas we service.
Simple Rainwater & Pump Service
Get in touch
Call Daniel and tell us what the pump or tank is doing. Photos of the pump and its label help.
Find the cause
We find out whether it’s the pump, the pipework or a leak before recommending anything.
Fix it properly
We repair or replace what’s needed and test the system with taps running.
-
“Daniel came to our rescue after we were let down by another plumber. We were on a tight deadline and he told us exactly what we needed to do to prepare. The work was fast, efficient and punctual. I highly recommend his work.”
~Christine R -
“These guys are awesome. Professional job every time they’ve been here. From gas installations and plumbing work to fixing leaks and servicing our sewer and stormwater systems — they’ve handled it all for years. Highly recommend.”
~Vaughn H -
“Daniel was prompt and immediately friendly. We had an issue with water pressure in our home and he worked efficiently to get it sorted. Got the job done right. Would definitely recommend him.”
~Melanie O
Rainwater Tank or Pump Problems in the Barossa?
If your pump has stopped or your tank needs connecting, call Daniel.
Give Us a CallWhy does my pressure pump keep turning on when no taps are running?
Usually a leak somewhere in the system, a toilet cistern that keeps refilling, or a non-return valve that has stopped holding pressure. We check each of these before suggesting a new pump.
Can you replace my pressure pump?
Yes. We supply and install replacement pumps sized to suit your home, or fit one you’ve already bought if it suits the job.
Can I have both mains water and rainwater at my house?
Yes, as long as the two are separated or protected with the right backflow device. We can set up a changeover that switches to mains when the tank is low.
Do you connect new rainwater tanks?
Yes. We connect tank outlets, inlets and overflows, link multiple tanks and run the pipework to the pump and house.
Do you work on tank water systems on rural properties?
Yes. Most of our tank and pump work is on rural and lifestyle properties around Williamstown, Cockatoo Valley, Mount Pleasant, Kapunda and the wider Barossa.
Need a reliable plumber in the Barossa or Adelaide’s Northern Suburbs?
Get in touch with Daniel today on 0431 511 530 for honest advice and quality plumbing services you can rely on.
Or fill out the form below and we will get back to you ASAP.